Vacon DPD00109 Manual de instalación descargar pdf (Pagina 11)

Keypad Remote Control Options vacon  11

Email: [email protected] • Fax 717-264-3115

Step 7. Re-assembling the AC Drive (XRKWM only)

1. Plug the Keypad Interface Module (KIM) fabricated in the previous step into the inverter, as it was originally

(see Step 2, #4).

2. Fasten the KIM with the two (2) M4 x 10 screws removed in Step 2, limiting torque to 12 in-lb. maximum.

3. Make sure that all cabling is routed so that it is not pinched in the assembly. The multi-conductor must be

routed through an unused conduit entry. Be sure to use the appropriate conduit fittings for your environment.

4. When you re-install the cover (required for NEMA 4X / IP66 integrity), limit the installation torque on the four

(4) screws to 26 in-lb. maximum.

Figure 7: Re-assembling the AC Drive (XRKWM Option)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Vacon DPD00109 Manual de instalación Pagina 11